RV Park, Campground and Site-Wide Wi-Fi and Fiber in Central Texas
Site-wide Wi-Fi is a property network built like a utility: a fiber or wireless backbone to every zone, outdoor access points placed from a signal survey, enough bandwidth per site for streaming and video calls at peak, and a guest login that can tie into your reservation system. Engineer Austin, based in Georgetown, designs, builds and can manage these networks for RV parks, campgrounds, subdivisions, marinas, campuses, ranches and industrial yards.
Backhaul, coverage, portal and service
- Site survey and RF design. A property walk, measurements at the edges and problem spots, mapping of trees, terrain and metal, and a placement plan with coverage maps (see Wi-Fi site surveys).
- Backhaul-first design. Fiber, outdoor copper, point-to-point or point-to-multipoint wireless, or a mix, sized before any access point is placed.
- Outdoor access points. Weather-rated units on poles, buildings and pedestals; mesh only where cabling is impractical.
- Fiber to the pad or pedestal. Pedestal, conduit, handhole and pathway layouts, trench plans and fiber routing to buildings and sites.
- Bandwidth planning per site. Targets from occupancy and device counts for each zone, with fair-use limits so one guest cannot slow the rest.
- Upstream circuits and failover. Fiber or fixed-wireless primary service with cellular or satellite backup.
- Guest portal. Branded login with free and paid tiers, voucher or reservation-based access, and integration with your property-management system where it offers one.
- Segmentation. Guest traffic kept apart from the office, point-of-sale, phones and the property's gate and camera systems.
- Managed and seasonal service. Monitoring, pre-season startup, winterization, off-season capacity planning and on-site response.
Survey, design, build, validate
Discover and survey
Site count, occupancy, amenities, upstream options, and whether Wi-Fi is an amenity or a revenue line. Then we walk the property and measure, at peak if the season allows.
Design and quote
Backhaul first, then access-point zones, pedestal and conduit layout, power and surge, portal and segmentation, and a written bandwidth plan. Fixed-fee quotation; nothing is ordered before your written approval.
Build and validate
Locates, trenching and conduit, fiber, pedestals, mounts, access points, head-end and portal. We walk-test the edges, measure peak and off-peak speed and record the baseline.
Document, train and support
Documentation, dashboard access and a training session for your staff. Managed service with seasonal checklists is available; expansion phases are already in the design.
Plans, test results and seasonal checklists
- Design package: property map, access-point plan, coverage maps, backhaul diagram, schematics and bill of materials.
- Bandwidth plan with per-zone and per-site targets and its assumptions.
- Pedestal, conduit and trench layout, with sealed civil drawings for road crossings or drainage only where a county or utility requires them.
- Fiber splice diagrams and test results; copper test results by cable ID; port map.
- Portal and segmentation design with a fair-use policy you can publish.
- Validation report: edge-site signal, roaming walk test, peak and off-peak speed.
- Controller and management access in your name, configuration backed up.
- Seasonal startup and shutdown checklists.
How AI speeds this up for you
The per-zone bandwidth model and written plan are drafted and cross-checked with AI assistance from your occupancy and site counts, then reviewed by the designer who walked the property. The plan reaches you faster, with its assumptions stated, and the same checks run on every design.
The parts that are not Wi-Fi
Wi-Fi installers tend to skip everything around the access points: where the conduit crosses the road, how the pedestal drains, whether the pole can carry the radio. We draw the pathways and pedestal layouts to stated design criteria, assumptions recorded, coordinate with your electrician of record, and leave every record with you.
The Wi-Fi and fiber design is done on engineering principles under a licensed engineering firm; where a road crossing or drainage detail falls under a permit that calls for a sealed drawing, our licensed engineer prepares it, or directly supervises its preparation, and seals it as engineer of record; a pole-loading detail is sealed by our licensed engineer or by a licensed engineer in the appropriate discipline, which we coordinate.
The practice moves with the field: outdoor Wi-Fi 7 access points, Starlink and LTE failover and fiber-to-the-pedestal methods are re-evaluated each year, and the seasonal checklists are revised after every season. Engineer Austin is Texas Registered Engineering Firm F‑15739; our team does the work to house standards set by our licensed Professional Engineer.
Platforms we build on
Ubiquiti UniFi access points and switching on a controller we host, Ubiquiti UISP and airMAX for point-to-multipoint backhaul, MikroTik routing with multi-WAN failover, and Starlink or LTE as backup circuits. Your site configuration and administrator access remain yours.
Who this is for
RV parks and resorts, campgrounds, subdivisions and HOAs, marinas, campuses, farms and ranches, and industrial yards spread across acreage. Fiber-to-the-pad is built by our fiber splicing and construction team, and backhaul masts by tower services.
Site-wide Wi-Fi, answered plainly
Will every site get coverage, including the back loop behind the trees?
That is what the survey is for. We measure at the edges and known dead spots, map the trees and metal, and place access points and backhaul to reach them. Where a building cannot cover a zone, a pedestal-mounted access point fed by fiber or a wireless link does. The validation walk confirms every site.
How much bandwidth does a park our size need, and will it hold up on a holiday weekend?
We build the number from your site count, occupancy, devices per site and what guests do at peak, which today means streaming and video calls in the evening. The plan sets a target per zone and per site, and fair-use limits keep one connection from taking the rest. The upstream circuit is sized to match, with a backup path.
Fiber, wireless or both: what should feed the access points?
Usually both. Fiber is the right backbone where trenching is possible: it carries far more bandwidth than the access points will need and tolerates lightning better than copper. Point-to-point wireless bridges the gaps where trenching is impractical, such as a creek or a paved loop. Mesh between access points is a last resort, because every hop costs capacity.
Can guests log in with their reservation, and can we offer free and paid tiers?
Yes. The portal can offer a free basic tier and a paid premium tier, with access by voucher, site number or reservation. Where your property-management or reservation system offers an integration, we connect it so check-in and Wi-Fi access line up. Terms of use and a privacy notice for guest data are part of the design.
Will the same network safely run our gate, cameras, phones and camp store?
Yes, on separate segments. Guest traffic is isolated from the office, point-of-sale, phones and the gate and camera systems, so a guest device cannot reach them and a busy evening does not starve the store's card reader. We design the network to accommodate those systems; the cameras and access-control hardware come from your vendor.
What happens when something breaks on a Saturday evening?
Under a managed service agreement the network is monitored and most faults are corrected remotely. During business hours we respond within two hours. After-hours and emergency response are by arrangement, with a four-hour callback target and a one-hour target for declared emergencies. Seasonal properties can scale the agreement to the months they are open.
Can we build in phases, and does the design allow for sites we plan to add?
Yes. We design the backbone, pedestals and head-end for the property you plan to have, then build the phase you are ready to fund. Conduit and fiber counts are sized for future loops, so later phases are additions rather than rework. The design package records what was built and what was reserved.
Start with a written assessment.
Tell us what you have and what is not working. Someone from our team, not a salesperson, replies within one business day by email or phone, and brings in our engineer when your request needs one. The assessment report is yours to keep whether or not you buy anything.